Dillon Reloader Accessories
Bullet Tray
Mounts directly to Strong Mount. Fits the Square Deal, RL550 series and XL650 strongmounts. You must have a strongmount in order to use this bullet tray.. Super 1050 Tray also available.
$148
Powder Check System
Fits the XL650 and RL1050/Super 1050 machines. Audiable warning of low or high powder charge.
$197
Low Powder Sensor
Provides an audible and visual reminder when it’s time to refill your powder reservoir. When the powder level drops to about 1000 grains, a buzzer will sound and a bright LED will light.
$118
Complete Powder System
Additional powder measures stay on the toolhead. Never change powder measurements again!
STD $269
RL100 $317
Belted Magnum $448
Aluminum Roller Handle
Fits the RL550 and XL650 / XL750 loaders, Reduces fatigue.
$130
Extra Pickup Tubes
The secret of really punching out a lot of rounds in a hurry. Have these tubes filled and ready to go. Your choice, large or small.
$90 for 4
Rapid Trim 1500
The RT1500 Electric Case Trimmer is designed to handle the heaviest trimming jobs, including converting 223 Remington into 300 AAC Blackout. The RT1500 makes short work out of trimming large quantities of brass.
The RT 1500 trim die is used just like a standard size die. The big difference is that while you are pushing the case into the die to size it, a 1/4 horsepower electric motor driving a carbide cutter is trimming the case to length. Chips are drawn off through a vacuum manifold that clamps to the outside of the special size/trim die. (Vacuum cleaner and hose not included.) Outside diameter of manifold is 1.250″ where the vacuum hose connects.
The RT1500 is equipped with a quick-disconnect power cord; and it can be used on any standard reloader, single stage or progressive. See below for caliber exceptions.
Available only in 110 volt /60 Hz.
NOTE: Toolhead and Size/trim dies are sold separately. Case lube must be used to size and trim brass.
$795
Powder Bars
Std Small or Large $84
Extra Large Mag $100
Extra Small $100
Powder Dies
STD $50
Mag Large $59
Case Feed Plates
STD Pistol / Rifle Sml or Lrg $110
Magnum $130
Kinetic Bullet Puller
$79